Tension/Compression Sensor / SM11C Compression Sensor
Product Categories Tension pressure sensor
Diaphragm-type load cells utilize a flat diaphragm for pressure sensing, with the housing and diaphragm integrated into a single structure. They are widely used in various electronic scales, cement batching silos, dry powder mixers, and industrial automation measurement and control systems.
Overview:
Diaphragm-type load cells utilize a flat diaphragm for pressure sensing, with the housing and diaphragm integrated into a single structure. They are widely used in various electronic scales, cement batching silos, dry powder mixers, and industrial automation measurement and control systems.
Features:
●Low profile.
●Good long-term stability.
● The alloy steel surface is brightly plated.
●Suitable for force testing and process weighing, etc.
● Employs a three-wire 24V power supply with 0~10V output.
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 100～350t |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.8±0.015mV/V |
| Input resistance (Rlc) | 770±10Ω (ohms) |
| Output resistance (Ro) | 700±2Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.05%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP67/IP68 |
