Filling and Packaging Instruments / SM40-HAX Filling Scale Controller

Application:

Suitable for quantitative filling and packaging control of liquid and solid materials.

Features:

1. Full metal jacket
2. Anti-electromagnetic interference, low electromagnetic leakage radiation, anti-external impact, corrosion resistance
3. Waterproof, dustproof, easy to clean
4. Short circuit self-protection, automatic recovery after fault elimination
5. SMT technology production
6. Exquisite and compact appearance, high precision and good reliability
7. RS485 communication port is connected to the computer to realize material batching function and remote communication
8. There are free communication protocol and MODBUS bus protocol for selection
9. It can control 4 different materials
10. Fully automatic fast and slow batching speeds
11. Two-color high-brightness digital tube display
12. Dual screens display gross weight and net weight simultaneously
13. Analog-to-digital conversion up to 200 times/second
14. Provides complete batching control function
15. With overshoot compensation function
16. With inching batching function, until the control target value is reached
17. Provides independent inhibit comparison times for startup and fast and slow batching conversion
18. When all products leave the factory, the sensor sampling channels undergo strict power supply, amplification, and acquisition precision digital calibration, and the instruments have good interchangeability

Technical indicators:

1. Non-linearity: 0.005% of full scale
2. Working power supply

Working voltage: 220VAC±30% (built-in EMI filter)

Working frequency: 50/60Hz

Maximum power consumption: 10W

3. Display instructions

Display mode: two rows of 6-digit LED digital tube display

Status indicator: 8 working status indicators, 4 weighing status indicators

Keyboard: 5 light touch keys

4. Environmental requirements

Working temperature: -20～+50℃

Storage temperature: -30～+60℃

Relative humidity: <90%RH (no condensation)

5. Structure: Panel mounted instrument
6. Instrument interface

Analog input: 1 channel, 0~30mV

Control input: 4-way photoelectric isolation passive input

Control output: 10 relay outputs, maximum load capacity 220VAC/1A

Communication interface: RS485/RS232/CANBUS

7. Weight: 0.5kg
8. Installation hole size: 90mm*42.5mm (width x height)