Tension/Compression Sensor / SM8A Load Cell
Product Categories Tension pressure sensor
This sensor is made of alloy steel or stainless steel and features a low-profile diaphragm box structure. It is manufactured using imported raw materials and proprietary processing technology from BEAN Corporation in the United States. It features laser-sealed welding and compressive load bearing. It is adaptable to harsh working environments and widely used in various measuring equipment.
Description
This sensor is made of alloy steel or stainless steel and features a low-profile diaphragm box structure. It is manufactured using imported raw materials and proprietary processing technology from BEAN Corporation in the United States. It features laser-sealed welding and compressive load bearing. It is adaptable to harsh working environments and widely used in various measuring equipment.
Features:Strong resistance to eccentric loads, good impact resistance, small size, low mounting platform, and high reliability.
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 0.5～300kg |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.015mV/V |
| Input resistance (Rlc) | 380±5Ω (ohms) |
| Output resistance (Ro) | 350±2Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.05%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP66 |
