Tension/Compression Sensor / SM8B Load Cell
Product Categories Tension pressure sensor
This sensor is made of alloy steel or stainless steel and features a low-profile diaphragm box structure. It is manufactured using imported raw materials and proprietary processing technology from BEAN Corporation in the United States. It features laser-sealed welding and compressive load bearing. It is adaptable to harsh working environments and widely used in various measuring equipment.
Overview:
This sensor is made of alloy steel or stainless steel and features a low-profile diaphragm box structure. It is manufactured using imported raw materials and proprietary processing technology from BEAN Corporation in the United States. It features laser-sealed welding and compressive load bearing. It is adaptable to harsh working environments and widely used in various measuring equipment.
Features:Strong resistance to eccentric loads, good impact resistance, small size, low mounting platform, and high reliability.
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 5～300kg |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.015mV/V |
| Input resistance (Rlc) | 380±5Ω (ohms) |
| Output resistance (Ro) | 350±2Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.05%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP66 |
