Angular displacement sensor / Angular displacement sensor SM36
Product Categories Angular displacement sensor
The SM36 angular displacement sensor is a sensor used to measure the rotational position of an object with a linear relationship between current output and shaft inclination angle. It can be used for position feedback and angle detection.
Overview:
The SM36 angular displacement sensor is a sensor used to measure the rotational position of an object with a linear relationship between current output and shaft inclination angle. It can be used for position feedback and angle detection.
Dimensions:
Technical data:
| Range specification (°) | ±45º |
| Operating voltage (VDC) | 15～26 (Recommended 24VDC) |
| Output signal | 4～20mA |
| Output smoothness (%) | ≤0.05 |
| Linearity (%F.S) | 3 |
| Repeatability (%F.S) | ≤0.15 |
| Hysteresis (%F.S) | ≤0.15 |
| Operating temperature range (°C) | -40 to +70 |
| Insulation resistance (MΩ) | 2000 |
| Wiring Marking | Two-wire system, no distinction between positive and negative poles. |
| Sampling frequency | W50ms |
| Protection level | IP66 |
| Installation | The pumping unit walking beam support is installed directly above the shaft and is fixed by welding or screws. |
product
