Other sensors / Strain measurement sensor HG47-YB1K
Product Categories Other Sensors
The HG47-YB1K-E strain gauge sensor's main function is to determine whether the vertical compressive bearing capacity of a pile meets design requirements. The high-strain method, when determining defects such as horizontally integrated gaps in the pile body and precast pile joints, can reasonably determine the degree of defect based on whether these "defects" affect the vertical compressive bearing capacity, and can serve as a supplementary verification method to the low-strain method. In some regions, using the high-strain method to increase the frequency of spot checks on bearing capacity and integrity has become a common practice.
Overview
The HG47-YB1K-E strain gauge sensor's main function is to determine whether the vertical compressive bearing capacity of a pile meets design requirements. The high-strain method, when determining defects such as horizontally integrated gaps in the pile body and precast pile joints, can reasonably determine the degree of defect based on whether these "defects" affect the vertical compressive bearing capacity, and can serve as a supplementary verification method to the low-strain method. In some regions, using the high-strain method to increase the frequency of spot checks on bearing capacity and integrity has become a common practice.
Features
This product has been continuously improved through more than 20 years of technological innovation;
Specially designed for test instruments;
Sealed waterproof design;
Strong anti-interference ability;
Easy installation
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
| Red: | +input | red: | +Incentive |
| Blue: | -input | blue: | -excitation |
| White: | +output | White: | +Signal |
| Yellow: | -output | yellow: | -Signal |
| Black: | T/vout+ | black: | Output positive |
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 0～1000 με |
| Sensitivity Sensitivity | 1.8±0.3mV/V |
| Comprehensive accuracy Class precision | 0.3%FS |
| Insulation resistance insulation resistance | ≥9000MΩ |
| Zero output Zero Balance | ≤0.1%FS |
| Operating voltage Power supply | 5 VDC |
| Temperature drift Effect of temperature | 0.1%FS/10℃ |
| Temperature compensation temperature compensation | 15~65℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 120% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP66 (IEC60529) |
| Cable length Cable Length | 1 meter |
110147YB1K 0-1000 με
110147YBE1Kw 0-1000 με/-40-80℃
Details
