柱式传感器 / HG-S5E柱式称重传感器
Product Categories Column sensor
HG-S5E柱式称重传感器采用双球头设计，采用氩弧焊接、防水等级为IP68。承载方式为压式结构，动态响应快、过载能力强、具有较好的自动调心功能，防水、防尘，安装容易，使用方便，完全满足大吨位称重要求，可用于制造电子汽车衡、动态轨道衡、大吨位料斗秤以及大吨位料仓料斗的工业称量及料位控制。
Description
HG-S5E柱式称重传感器采用双球头设计，采用氩弧焊接、防水等级为IP68。承载方式为压式结构，动态响应快、过载能力强、具有较好的自动调心功能，防水、防尘，安装容易，使用方便，完全满足大吨位称重要求，可用于制造电子汽车衡、动态轨道衡、大吨位料斗秤以及大吨位料仓料斗的工业称量及料位控制。
Features:Fully sealed and waterproof, suitable for harsh environments. Good dynamic response, strong anti-overload capability. Long-term stable and reliable performance.
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 10～500t |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.002mV/V |
| Input resistance (Rlc) | 400±20Ω（ohms） |
| Output resistance (Ro) | 380±5Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.02%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP68 |
product
