HG23C-2 Axis Pin Sensor
Product Categories Axis pin sensor
The HG23C-2 shaft pin sensor is safe and reliable, with a high safety overload factor, and is easy to install. It can directly replace the original shaft pin force measurement device. It is used in lifting safety limiters for construction hoists, tower cranes, port machinery, overhead cranes, elevators, and other lifting equipment.
1. Overview
The HG23C-2 shaft pin sensor is safe and reliable, with a high safety overload factor, and is easy to install. It can directly replace the original shaft pin force measurement device. It is used in lifting safety limiters for construction hoists, tower cranes, port machinery, overhead cranes, elevators, and other lifting equipment.
2. Features
Simple structure;
Adopting built-in patch technology, the manufacturing is complicated;
Good sealing and moisture-proof performance, high safety factor;
Industrial-grade design, protection grade IP67;
Operating temperature range from -40°C to +85°C
Dimensions(In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification
| Project Type | Technical parameters |
| Measuring range Nominal load range | 3t |
| Operating voltage Power supply | 10~12 VDC |
| Drawing current | <100 mA |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 1.0±0.05mV/V |
| Input resistance (Rlc) | 700±10Ω（ohms） |
| Output resistance (Ro) | 703±5Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.5%FS |
| Temperature drift Effect of temperature | 0.3%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 150% FS |
| Body fracture limit Safety margin against breakage | 200% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP67 |
